how can know my network mush is it work

(Read 4784 times)

Mar 16^th, 2008 at 10:05am

i want how can check or test my network mush is it ok or down by telnet for modem idirect 3100

Mar 16^th, 2008 at 8:59pm

You mean MESH?

Mar 17^th, 2008 at 6:40am

yes i mean mesh

Mar 17^th, 2008 at 10:40am

If you are running a mesh topology, simply ping to the other mesh node. The round trip should be less than 1 second (example 700-800ms).

If you are passing thru the hub your icmp will be approx 1.1 seconds. (1100ms).

Most mesh networks are around 700-800 ms (RT node to node).

Mar 18^th, 2008 at 8:00am

thanks mr for reply my ask
but i can do this test (ping ) with point to point also

Mar 18^th, 2008 at 10:39am

You definitely want to ping point to point (pinging the other satellite router within your mesh network).

Mar 20^th, 2008 at 10:14am

i did ping from onther site on my site and give me time=1409 ms time=1310 ms
is this problem or normal ?
nots : the site not be mesh with my site mesh

Mar 20^th, 2008 at 10:46am

Are both nodes in a MESH inbound?

With your present round trips (ICMP) you are passing thru the hub and the payload is not mesh. If it were mesh, you would see values in the 700-800ms range.

Mar 20^th, 2008 at 11:03am

yes mr the node is not a MESH inbound (did ping from it)
is another network .
but is this round trips normal 14099 ms -1310 ms if not mesh ?

Mar 22^nd, 2008 at 12:00am

Having a hard time understanding what you are saying.

Are the remotes in a Star (standard) network or are they in a mesh network?

With the round trips you are stating/seeing, those remotes are NOT in a MESH (remote to remote without traversing the hub) network/environment.

Mesh payloading averages 700-800 ms (round trip). Whereas if those same two remotes were in a star network (passing thru the hub) those round trips would be 1200ms+

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.