iDirect3100 zeroize all command????

(Read 3454 times)

Mar 31^st, 2008 at 1:02am

Hello there,

i was trying the command on the telnet. I didn't understood well the command zeroize and i put in the command of the telnet zeroize all. Only the power led is on. I have no connectivity at all. I can ping the terminal but i can't telnet into it or with iSite. Any comments or ideas pls? Sad

Mar 31^st, 2008 at 12:37pm

You have a long road ahead of you.

Things you will need:

- console cable
-WinSCP
- the remote image and cumulative update for the iDS version you were using.
- options file (for Falcon) to operate in that iDS.
- iSite for the version you are using.

Get with your service provider and have them walk you thru manually loading that box with its cumulative_update, image, and options file.

Mar 31^st, 2008 at 6:04pm

Another reason my clients do not have access to the passwords that allow this kind of thing to happen.

According to my notes "zeroize" only resets the secruity paramenters, does this mean it resets the modem back to a factory level Mike?

If so, it's not a command to play with by any means

PV

Mar 31^st, 2008 at 11:36pm

Honestly, I have never had anyone do this. I would think it is fully recoverable with a console connection and WINSCP. Again, I have never crossed this bridge or had anyone do this...so I cant even speak (educated) about what settings it may revert to.

I would be interested in seeing how much access is available thru console. i.e...
Does it get thru redboot?
Falcon (implying there is an opt in it)?

I am somewhat curious of what it reverts to...

Apr 3^rd, 2008 at 12:43am

Hey guys,

Nothing happend here. I have hyperteminal in my computer i tried with 2 modems 3100 with 3 different ways. One with adaptor 9-pin to lan female and another one with connecting the cables as they sent me in the scheme (provider). It doesn't connect with hyperterminal at all. Can anyone help me with this?

Let's say i have the standard UTP with numbers and colors:

UTP:
1 - white orange
2 - orange
3 - white green
4 - blue
5 - white blue
6 - green
7- white brown
8 - brown

COM adapter female has 9 pins
what color from UTP i have to connect in pin number in the COM female adapter?

Please help guys....

All wrong here....

Thank you!

Apr 3^rd, 2008 at 1:31am

So you get Nothing on console? Not even a [>] sign? Completely dead?

Apr 3^rd, 2008 at 2:18am

Yes,
Completely dead. I don't think that the problem is with the modem bcz i tryed with another one modem that is working normally and the same. I think that must be a problem with the cable or with the com port. Hey mike can u send me a scheme for the cable with e-mail: enetprovider@yahoo.com?

Thank you!

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.