MRTG and iDirect

(Read 12081 times)

Nov 5^th, 2008 at 12:58pm

sorry sir,maybe I will disturb you for moment.

I have problem in iDirect snmp to mrtg,.
mib rxtcp&txtcp can't load to mtrg server,.
I have tried it but that tools doesn't work
precedure instalation i have done
but still doesn't work
can u show me the way,please....
my softwere 7.0.1.2

thank you

Nov 5^th, 2008 at 4:12pm

Is the snmp server (snmpsvr) running on the NMS (at the hub?)

Nov 18^th, 2008 at 9:22am

snmpsvr running,.
OID .1.3.6.1.4.1.13732 respon but
OIDs 1.3.6.1.4.1.13732.1.4.1.1.2/8 not respon

Nov 18^th, 2008 at 12:09pm

There is a document published by iDirect specifically for piloting MIBs to MRTG. Have you read that document?

Nov 24^th, 2008 at 8:24am

hi MIke,

I have followed for steps to piloting MIBs to MRTG.but still doesn't work & MRTG displayed was blank there's no traffic

thank's

Nov 24^th, 2008 at 12:22pm

Have you followed the instructions on page 184 and 185 of the iMonitor user guide.

It starts with modifying the filename snmpd.conf with vi editor (file location # cd /etc/snmp/ )

Dec 10^th, 2008 at 7:12pm

I have the same problem, did someone solved the issue?

Dec 11^th, 2008 at 2:12am

The only thing I was recommending, was to ensure that the procedures for enabling SNMP were being followed.

Mar 18^th, 2009 at 4:58am

Please response me.

Dears,

I work in service company. I'm just starting my carier in this company. So my first mission is installing and preparing MRTG for the work.

And i need help.

i need installation's information about MRTG in idirect for my server. /redhat/

My best regards
My contact is : taivna.b@gmail.com

So please guide me.

Mar 18^th, 2009 at 11:05am

Do you have an iSupport agreement with iDirect TAC? If so, there is a document on the TAC website specifically for piloting MIBs to MRTG.

Mar 19^th, 2009 at 2:21am

i have iSupport agreement. But i can't find this file. you give me link pls

Mar 19^th, 2009 at 11:08am

This is actually out in the open.

https://www.idirect.net/libraries/cm_software_releases/MRTG%20Tech%20Note%2011_2...

Mar 22^nd, 2009 at 3:19pm

When creating the OID to query, have you determined the correct DID for a particular remote site in your network? You will see the DID displayed in iBuilder, on the first tab for the site in question. The document uses an example of a 5350 satellite router with serial number 4022 whose derived ID is 6819766. You will not have this device on your network.

Mar 25^th, 2009 at 9:22am

hi i installed mrtg tnan error detected.

so anyone help me !!!

SNMP Error:
no response received
SNMPv2c_Session (remote host: "122.201.31.225" [122.201.31.225].161)
community: "public"
request ID: 615095964
      PDU bufsize: 8000 bytes
   timeout: 2s
   retries: 5
   backoff: 1)
at /usr/local/mrtg-2/bin/https://www.satsig.net/lib/mrtg2/SNMP_util.pm line 490
SNMPGET Problem for 1.3.6.1.4.1.13732.1.4.1.1.2.269034 1.3.6.1.4.1.13732.1.4.1.1.8.269034 sysUptime sysName on public@122.201.31.225:::::2:v4only
at /usr/local/mrtg-2/bin/mrtg line 2038
2009-03-25 08:23:59: WARNING: skipping because at least the query for 1.3.6.1.4.1.13732.1.4.1.1.2.269034 on 122.201.31.225 did not succeed
2009-03-25 08:23:59: WARNING: no data for 1.3.6.1.4.1.13732.1.4.1.1.2&1.3.6.1.4.1.13732.1.4.1.1.8:public@122.201.31.225. Skipping further queries for Host 122.201.31.225 in this round.

Mar 25^th, 2009 at 9:27am

hi novalino.

our problem is like. are you solve this problem ?

Mar 25^th, 2009 at 1:18pm

Hello Taivna, what is 269034, is this a DID of a remote?

The OID 1.3.6.1.4.1.13732.1.4.1.1.8.269034 should give you total outroute tcp bytes.

I suspect you have a problem with the DID you are using or possibly the SNMP version of the get request.

Mar 26^th, 2009 at 5:18am

i think my DID is fine. And problem is other reason. but i don't know this reason. kk

Mar 27^th, 2009 at 6:45am

hey all.

are you know "oid-mib-cache.txt"

Mar 27^th, 2009 at 7:15am

hey my snmp version is wrong ???

Mar 31^st, 2009 at 5:09am

hey all now my mrtg is working... kk

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.