best RG cables for iDirect systems

(Read 6412 times)

Jul 20^th, 2009 at 6:16am

Hi All,

What are the best RG11 cables and connectors to be used with iDirect 3100 modems

Many thanks,

Ahmed
Arabskys

Oct 29^th, 2009 at 4:20pm

I need some help, i want to put my Idirect at 70m of the dish, which kind of the cable can i use ?

Because, i try RG8, some problem, now i want try LMR 400.

Oct 30^th, 2009 at 7:16am

You need to use 75 Ohm cable with iDirect. The interface is at L-band and the IFL cable needs to carry DC voltage for the BUC and LNB and also potentially 10 MHz so the DC resistance is very important. iDirect recommend RG6 and RG11 in their installation documentation. I believe that TAC can give you a table of maximum cable run distances depending on the BUC you use.

Nov 2^nd, 2009 at 8:05am

Dear

Maximum IFL Lengths (Ku-Band):

RG-6

1Watt NJRC : 302.9 Feet (Limited by RF)
2 Watt NJRC: 302.9 Feet (Limited by RF)
4 Watt NJRC: 251.4 Feet (Limited by DC)

RG-11

1 Watt NJRC: 514.1 Feet (Limited by RF)
2 Watt NJRC: 514.1 Feet (Limited by RF)
4 Watt NJRC: 514.1 Feet (Limited by DC)

Best Regards,

Jawad Malik

Nov 3^rd, 2009 at 6:45am

IFL Coax Cable recommended by iDirect:
1. RG11 Commscope , manufactured part number 5902, iDirect partnumber 4114-0002-0001, loss (dB/100ft at 1700 MHz) = 6.1, DC resistance (ohms/100 ft)=0.426.

2. RG11 Belden , manufactured part number 8213, , loss (dB/100ft at 1700 MHz) = 7.1, DC resistance (ohms/100 ft)=0.315.

Commscope 5902 lenght max are:

1 Watt NJRC: 514.1 Feet (Limited by RF)
2 Watt NJRC: 514.1 Feet (Limited by RF)
4 Watt NJRC: 514.1 Feet (Limited by DC)

like jawadg said.

Best regard,

Adrian

Dec 17^th, 2009 at 7:12am

Thank you. This was so informative and helped me a lot.

Please find below a spec sheet for the mentioned model:
https://www.mjsales.net/pdf/5902.pdf
https://www.farnell.com/datasheets/28384.pdf

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.