|
Aug 19th, 2009 at 8:29am
The downlink carrier frequency from the satellite, and your desired L band frequency, determines the LNB Local Oscillator frequency required.
If your hub needs to receive over the full Ku band range use a low gain, wide band, LNA followed by a 2-way or 4-way Ku band splitter and then connect whatever LNBs and downconverters as necessary. Hub dishes tend to be very large so be careful to keep power levels within the linear range of the output stage amplifiers to avoid intermodulation. In other words, design your receive system, don't just put parts together willy-nilly.
Best regards, Eric.
|
