!!!zimage!!!

(Read 11832 times)

Sep 11^th, 2009 at 9:33pm

Dear Mike,
I was able to extract the zimage file from the cumulative update package, please i need a step by step instruction on the procedure for the installation of the zimage file using redboot for iDirect 3100. Remember my motive is to install the linux back into the box and to enable me use the iSite again.

Expecting your reply ASAp

Regards

Green
n57green@gmail.com

Sep 12^th, 2009 at 5:11pm

Check your messages.

Sep 16^th, 2009 at 4:12pm

Dear Mike,
i need exactly the same think
aze_mah@hotmail.com
thank you in advance mike

Sep 22^nd, 2009 at 9:00pm

Dear Mike,

I am on the look-out for your mail on the procedure regarding installing zImage in infinity3000

I have a process for Evolution X3 but not sure if its the same for infinity 3000

Below is procedure if found for Evolution X3

...........................................................................
Loading the zImage on the Remote

Redboot> prompt displays.
Redboot> load -v -r -b 0x01600000 zImage
Redboot> fis unlock Linux
Redboot> fis erase -f 0x50060000 -l 0x00100000
Redboot> fis write -b 0x01600000 -f 0x50060000 -l 0x100000

Then, I will have to

Reload the Flash by following the procedure 3, 4, and 5 of “How Do I Recover iNFINITI Remotes
and Line Cards” on establishing IP connectivity, and start SSH Daemon, reloading the Software
Package and Options file

I await your contribution/suggestion

Regards

A. O. Green

n57green@gmail.com

Sep 23^rd, 2009 at 1:29am

I have sent you a PM.

Sep 24^th, 2009 at 2:30pm

Dear mike

just to be sure, did you send the procure to
n57green@gmail.com

what was the subject.

I will send you a mail on : TDMAMike@gmail.com

Kindly send me a reply with the procedures

I can just find it. Ive gone tru my junk mails too.

Regards

Sep 24^th, 2009 at 7:08pm

The PM functionality is unique to this SATSIG site.

Sep 24^th, 2009 at 9:19pm

Mike

Looking in the satsig forum server directories you appear to have sent 13816 bytes on 20090923 at 01:23 which matches the server time of your posting above.

Username AOGreen needs to log in the forum home page and there should be a "Your instant messages" waiting to be read link at the bottom - maybe...

Best regards, Eric.

Oct 8^th, 2009 at 3:09pm

Pls i need the Z image file for my 3000 series

Oct 8^th, 2009 at 5:02pm

You need to extract it from the image sets on the NMS server. It is different for every iDS version.

Oct 11^th, 2009 at 4:20pm

where is my PM mike

Oct 11^th, 2009 at 4:57pm

I am not going to get into the business of instructing folks on how to reload zimage. For starters, it is unique to the iDS version for the hub you are operating. If you want to be walked thru how to load it, I suggest that you use the TAC at iDirect. They may recommend that you RMA the box, but it never hurts to ask. There is a reason that the zimage procedures are not publically shared. Quite simply - There are a lot of folks who lack the expertise to engage at that level. So, to answer your question, there wont be a PM coming. Too much room for error.

Sep 10^th, 2011 at 6:39pm

Hi Sir

Coud u pls mail me Zimage i want to use it on 3100 modem sparkinglight95th@gmail.com

Jan 24^th, 2012 at 2:50pm

hello everyone,

can some1 send me the Zimage and the procedure for the infinity 3100 modem.

email: michel_204@hotmail.com

Apr 25^th, 2016 at 1:16pm

Hello All,

Having challenge recovery on X3 modem after flash as been erase this error message keeps appearing "$T0a0f:ff0aaab0;0d:0000b4a8;#99” making it impossible to complete the recovery procedure...

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.