Telnet iDirect Modem !

(Read 5112 times)

Jun 11^th, 2010 at 1:35pm

Hello All,

I Have a question that when i telnet the iDirect modem from iMonitor ; let say i am using 192.168.1.4/30 Pool

Modem Ip = 192.168.1.5
Router Ip = 192.168.1.6

Why the iDirect modem is not pinging the router ip from device from the iDirect modem as it is physically connected to the router ???

P.S. packets are untagged and are without VLAN.

Jun 28^th, 2010 at 3:20am

Does the router allow ping replys?
does the link on the router say UP UP?
does the modem see the link? I.e No LAN DISCONNECTED alarms?

Jul 1^st, 2010 at 9:19am

IP Routing OK?

Jul 2^nd, 2010 at 7:33am

i Need to ping From iDirect Modem ...

Router is Up and link is working fine , all the connectivity shows by iMonitor but when i telnet the iDirect Router and ping the next device (Cisco ROuter) is not going to ping ..

Jul 4^th, 2010 at 8:54am

Have you tried using RIPv2 in your routing protocols?

Regards.

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.