www.satsig.net

Satsig.net home page

Index page for all SatSig topics

SatSig Topics IndexDish pointing and alignment › pointing to AM22
SatSig topic:

pointing to AM22

(Read 3124 times)
Jul 31st, 2010 at 7:51pm  
hello i try to get lock to AM22 on 53E but i cant
the location is Latitude = 31.8752, Longitude = 10.9859
the problem is i can get lock with hig SNR with 1.2m
but i can not with 1.2m
what i have to do to be lock on satellite useing 1.8m
Aug 1st, 2010 at 12:06pm  
This does not make sense:
Quote:
the problem is i can get lock with high SNR with 1.2m
but I can not with 1.2m
what i have to do to be lock on satellite using 1.8m  


I assume that you mean that you can get a good signal with 1.2m and not with 1.8m.

Make sure that the 1.8m antenna is correctly assembled and that the same LNB type is in use and same polarisation angle set. The LNB cable connection should be checked. Use the same LNB and cable if possible and just carry across from one antenna to the other.

Pointing with the 1.8m antenna needs more accuracy than the 1.2m as the beamwidth is narrower.

Best regards, Eric.
Sep 20th, 2010 at 8:37am  
Also the offset angle is different for the two dishes

www.satsig.net

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.