SatSig topic:

Tooway Downstream - Low receive signal - fell to 6 or 7 dB .

(Read 11647 times)

Nov 11^th, 2013 at 3:50pm

Hello ,
A few days ago the downstream signal fell to 6 or 7 dB .
Upstream is fine - 11 dB.

Antenna did not move from her position .
I attach the signal level in the last 2 days .
Can you help me ?
Thanks

Nov 12^th, 2013 at 8:33am

In a few days I'll go to my client to adjust the antenna , maybe this is the problem .
Meanwhile , maybe can get a tip from someone who had the same problem .
Thanks !

Nov 13^th, 2013 at 12:00pm

Hello my friend...

1.- How did you get this graphics? Do you enter in the modem?

2.- The SNR is not the SIGNAL. SNR is the distance between the signal and the NOISE. Is the separations.....

Sometimes, the noise is closer to the signal, for the weather, and the SNR is not only in your side, some time ago, I had ( and a lot of people ) a signal cutoff, the SNR was close to 1, and the problem were in Turin, Storms.... but in our side, the antennas were ok...

Nov 21^st, 2013 at 9:59am

Quote:

Hello my friend...

1.- How did you get this graphics? Do you enter in the modem?

2.- The SNR is not the SIGNAL. SNR is the distance between the signal and the NOISE. Is the separations.....

Sometimes, the noise is closer to the signal, for the weather, and the SNR is not only in your side, some time ago, I had ( and a lot of people ) a signal cutoff, the SNR was close to 1, and the problem were in Turin, Storms.... but in our side, the antennas were ok...

Hello ,

1. About graphics :
I entered the portal page: https://external.skylogicnet.com/oss
You need a username and password

2. The SNR is not the SIGNAL .... ?!!!!?????
I never said this thing !!!!
In my graphic are the downstream and upstream parameters , this parameters you find in OSS Portal .

I think you did not understand my problem .
I have problems with downstream parameter that is too small . I have no problem with SNR . My SNR is ok .

Nov 21^st, 2013 at 7:36pm

I think the misunderstanding is due to the word 'signal' in the original posting, which should have read 'SNR', so as to correspond with the graphic.

As I see it, there IS a problem with the downstream SNR. It is too low. The graphic suggests it should be at least 10 dB. ( green dashed line)

Dec 7^th, 2013 at 10:42am

Yes, I misunderstanding. I'm sorry.
How did you get access to this portal?

Is very interesting this graph.

Dec 27^th, 2013 at 7:05pm

The link he gave doesn't work.

Dec 27^th, 2013 at 10:48pm

Quote:

The link he gave doesn't work.

Actually, that link does work but you have to be authorised by Skylogic to access the OSS portal ... it's only available to a handful of resellers.

Dec 28^th, 2013 at 6:02am

Quote:

The link he gave doesn't work.

Actually, that link does work but you have to be authorised by Skylogic to access the OSS portal ... it's only available to a handful of resellers.

OK thanks. The great masses of the unwashed are not admitted! Grin