www.satsig.net

Satsig.net home page

Index page for all SatSig topics

SatSig Topics IndexTooWay and KA-SAT satellite › DOES NOT WORK - CLIENT-SIDE PROXY STATISTICS DISCONNECTED?
SatSig topic:

DOES NOT WORK - CLIENT-SIDE PROXY STATISTICS DISCONNECTED?

(Read 8824 times)
Jun 29th, 2014 at 7:13pm  
Hi!

Installed Tooway Satellite, but it didn't work.. Can this be the problem?
"Client-Side Proxy Statistics Disconnected"
?

I don't know what to do.. and both numbers are below 10.  Sad

...
Modem state

...
Basic status

...
Installation configuration

Thank you!
Jul 1st, 2014 at 9:54pm  
The problem is that you are not receiving a good satellite signal. Rx S/N=-3dB or Rx S/N=0dB means the receiver is listening to background noise only from the first transistor in the LNB in front of the antenna. Most likely you are not pointed at the satellite. Keep working on it till you get the maximum possible Rx S/N value, typically up about +14dB. It depends on your location.

Set the elevation angle accurately and the swing the dish boldly sideways to find the satellite.
Jul 10th, 2014 at 2:55pm  
Your dish is not pointing to ka-sat

0 signal. Just a yellow circle. Not signal

www.satsig.net

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.