www.satsig.net

Satsig.net home page

Index page for all SatSig topics

SatSig Topics IndexiDirect Forum: hubs and terminals › Why are Direct X1 LEDs flashing ?
SatSig topic:

Why are Direct X1 LEDs flashing ?

(Read 2961 times)
May 27th, 2018 at 4:47pm  
Someone has asked me:

I have an X1 modem whose RX, NET and TX lamps flash at the same time in green. The 1.8 m antenna is well aligned on xx in a site with latitude xx and longitude xx. The RG6 cables are good quality and measure 30 m. The power supply is stabilized and the temperature is below 50 ° C. This modem has worked well for over a year before, and suddenly this change took place. What can be the cause? The down C/B varies continuously between 12 and 6 dB, while the Tx Pwr is -24 dBm.

Does anyone have any ideas ?

Best regards, Eric.
Jun 3rd, 2018 at 3:43pm  
Mt attention has been drawn to this blog:
https://satoms.com/idirect-vsat-modem-flashing-net-light/

I'm back on the internet now and hope to make more considerations over next few days.

Eric.

Jul 26th, 2018 at 5:48pm  
Thank you

Helpfull.

I will tell you !

www.satsig.net

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.