Satellite Internet Forum.
Please note that this forum is now READ ONLY and closed for login and changes
The new forum is here Space and Satellite Communications forum

Welcome, Guest.
Welcome to this satellite broadband discussion forum.  Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure.  Both service providers and customers are encouraged to contribute.  Read the Forum rules.
      Satellite internet forum          

LNB and Receiver are Compatible?

(Read 4047 times)
Ex Member

Jul 1st, 2010 at 8:44am  
Hi Everyone,

I have a satellite receiver Dansat DSR 7500 and LNB Arisat Universal Ku LNB model AT 1 Gold and Dish with 80cm.

Are this compatible each other to get signal from the satellite.

My place is in Philippines.

Appreciate any reply on this.
Back to top
IP Logged
Eric Johnston
Senior Member

Personal text from Profile,
Options, Top line

Posts: 2107
Reply #1 - Jul 1st, 2010 at 10:48pm  
A satellite TV forum might be a better place to get an answer to your question.

My comment is:

Almost certainly the equipment is compatible. The receiver will set the LNB to low Ku band or high Ku  band using 22kHz tone (9.75 or 10.6 GHz local oscillator) and switch the polarisation by voltage control.

Look in http://www.lyngsat.com for possible satellites and free-to-air (FTA) programs. Note the lyngsat beam contour maps which indicate dish size requred on each contour.  Point your dish at promising satellites.

This dish pointing and polarisation adjusteemnt angle calculator for south east asia will help you.

Best regards, Eric.
Back to top
IP Logged
Ex Member

Reply #2 - Jul 2nd, 2010 at 6:36am  
Thanks Eric, it would a great help....
Back to top
IP Logged