VSAT installation in Democratic Republic of Congo

VSAT satellite dish installation for Standard Chartered Bank in Ethiopia

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.

Home Login Register

Satellite Internet forum › LinkStar Forum: VSAT hubs and terminals › Frequencies and symbol rates

Pages: 1

Send Topic | Print

Frequencies and symbol rates

(Read 16867 times)

Eric Johnston Senior Member ★★★ Offline Posts: 2109	Apr 18^th, 2004 at 11:04am If you are involved in setting up LinkStar terminals it will be helpful to add the outlink frequencies and symbol rates to the various pages like https://www.satsig.net/ivsat-europe.htm All inputs welcome. Best regards, Eric.
Back to top	IP Logged

pius ukachukwu Guest	Reply #1 - Aug 5^th, 2004 at 7:26am is there any other way to configure linkstar terminal except telnet?
Back to top	IP Logged

Ex Member Ex Member	Reply #2 - Aug 7^th, 2004 at 9:20am hello pius, the only way to setup a linkstar terminal is to use Telnet. i have the current manual from viasat to help you. I can teach you how to go about setting it up . where are you in nigeria ? i am in Port harcourt-
Back to top	IP Logged

M.A.G Guest	Reply #3 - Sep 11^th, 2004 at 8:39pm HI i have linkstar but it'v very slow da download rate about 10kb/s but b4 was about 700kb/s so plz help me
Back to top	IP Logged

Ahmed Wacho Guest	Reply #4 - Dec 12^th, 2004 at 9:57am I can help you for the configuration of Linkstar. I know all the frequencies and symbol rate of West Africa. Which satellite do you want? Ahmed
Back to top	IP Logged

Ex Member Ex Member	Reply #5 - Apr 1^st, 2006 at 7:59pm Hello Ahmed, Pls I need symbol rate, freq, transponder and polarity for PAS-1R 45'W, NSS-7 22'W, Intelsat 907 27.5'W. Your help will be appreciated. Thanks. Felix Smart E-Mail: felixsmarto@yahoo.com
Back to top	IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.