Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

LinkStar Site Installation Procedure

(Read 5841 times)
Ex Member
Ex Member

Apr 24th, 2007 at 11:58am  
Hello All,

I am newly registered to this forum. I must say i am impressed with the level of resources available on this site/forum.

I am just about to start activating linkstar modems on the Mweb Platform. Can anyone help me with an itemised sequence/procedure to follow during installations of new sites.
Any other related information on site activation will be highly appreciated.

Best regards

Back to top
IP Logged
Eric Johnston
Senior Member

Posts: 2109
Reply #1 - Apr 24th, 2007 at 12:26pm  
The box for the LinkStar modem normally contains a large glossy quick reference installation guide.
See here: https://www.satsig.net/linkstar/link-star-install-glossy.pdf   693k bytes

There is a more substantial installation instructions manual available from your service provider.
See here:  https://www.satsig.net/linkstar/linkstar-vsat-rcst-installation-manual-2005.pdf  1909k bytes

In both cases this may not be the latest version.  Note the large file size before downloading.
Best regards, Eric.
Back to top
IP Logged
Ex Member
Ex Member

Reply #2 - Apr 24th, 2007 at 3:54pm  
Thank you so much for the guide Mr Eric.
I am presently going through both resources and i am finding it intresting.

Thank you so much.

Back to top
IP Logged
Ex Member
Ex Member

Reply #3 - Jun 30th, 2009 at 10:04am  
Dear Hammajam,

on our afri-sat company website we published a short step by step guide including the typical modem configuration and the typical setup process for customers:

These page shows the public IP setup with the Linkstar terminal:

This are just examples for you - but they should work with the regarding modified parameters (Frequency, Polarity, IPs etc.) with any other Linkstar broadband provider.

You will get these parameters from your ISP.

good luck and
best regards,

Back to top
« Last Edit: May 27th, 2010 at 10:10am by N/A »  
IP Logged
Pages: 1