Advertisment:

Broadband via satellite

Advertisment:

Worldwide satellite services from Ground Control Company

Satellite Internet Forum.

Welcome, Guest. Forum rules.

Home Login Register

Satellite Internet forum › Dish pointing and alignment › Prodelin 1383 3.8m x-pol problem

Pages: 1

Send Topic | Print

Prodelin 1383 3.8m x-pol problem

(Read 4362 times)

Ex Member Ex Member	Mar 17^th, 2008 at 10:32pm Hi, we have problems with a Prodelin 3.8m C-Band model number 1383. There seems to be a small amount of Cross-pol transmit. Is anyone aware of any issues with the feed on these antennas?? Intelsat seem to think there is a known problem with them. Many thanks
Back to top	IP Logged

Oasis Networks Senior Member ★★★ Offline Posts: 232	Reply #1 - Mar 18^th, 2008 at 6:59am Hi, Prodelin is usually ok, but we faced the same issue with this exact model in the past. Was it ok when you first installed it or this is the first time you are using it? Did you try to pick and pol with the satellite opertator? Is it linear or circular OMT? Where is the system located? Kind regards, Nimrod
Back to top	www.oasisnetworks.net - Oasis Networks - Online with you! WWW \| Skype/VoIP \| Facebook IP Logged

Ex Member Ex Member	Reply #2 - Mar 18^th, 2008 at 7:07am Hi, thanks for replying, I believe it was ok when first installed. Intelsat are seeing some 3db of x-pol, its in a global transponder so I can see it also. We have tried to null it out but this did not work. The carrier is in the Ivory Coast. Its the feed I am concerned about... Intelsat seem to say there is a known problem.
Back to top	IP Logged

Pages: 1

Send Topic | Print

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.