Frequecy and symbol offset

(Read 3353 times)

smlt_vsat Senior Member ★★★ Offline Posts: 56	Aug 4^th, 2008 at 7:34pm Dear All What is meant by frequency offset and symbol offset and how it influence and affect in remote commisioning. What should be the nominal valvue of those and on what factors depends ?what happens if the vlue is low or high smlt
Back to top	IP Logged

Ex Member

Ex Member

Reply #1 - Aug 5^th, 2008 at 12:56pm

Eric, is probably the best guy to answer this....but I will give it a shot. �Freq offset is drift by an oscillator from the nominal frequency...this information is reported to the Hub which makes corrections accordingly. �Symbol offet is a calculation used by the Hubs UCP (after acquisition/post-frame start) to make symbol delay corrections as bursts arrive at the hub. This information is also reported and controlled by the Hub.

Most HNOs wont get much use out of those values when commissioning a remote. �

IP Logged

smlt_vsat Senior Member ★★★ Offline Posts: 56	Reply #2 - Aug 5^th, 2008 at 5:35pm Dear Mike Really thanks Dear Eric , Please provide if any more information as Mr.Mike told
Back to top	IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.