Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

Modulators wanted

(Read 1638 times)

Posts: 23
Oct 4th, 2008 at 3:13pm  
Looking for large number of older used modulators. Need both cut channel and frequency agile. Must be located within the CONUS.
Back to top
« Last Edit: Oct 5th, 2008 at 1:22pm by Admin1 »  
IP Logged
Eric Johnston
Senior Member

Posts: 2109
Reply #1 - Oct 5th, 2008 at 1:05pm  
I think possible suppliers to you will need more information to determine if their old items might be of use to you.  

An agile frequency modulator might comprise simply a synthesised oscillator plus modulator chip.
Example synthesised oscillator for freq range 1.7 - 2.2 GHz (100kHz steps):
ANS2-1700-100 1700-2200 from http://www.atlanticmicrowave.co.uk/
...more details

Example modulator for freq range 1.8 - 2 GHz:
IQBG-2000A from http://www.minicircuits.com/
Surface Mount I&Q Modulator, 50 ohm; LO Drive +10 dBm from $24.95 qty.(1-9) 1.8 to 2.0GHz
...more details

You need to provide a full technical specification for what you actually want.  Frequency range, step size, physical configuration etc.

Best regards, Eric.
Back to top
IP Logged
Pages: 1