iDirect 3000 and 5000 update ?

(Read 2341 times)

remstaler Member ★★ Offline Posts: 8	Nov 29^th, 2008 at 1:31pm Hello, i have to update my iDirect 5000 modem to version 8. i did this before with a iDirect 3000 modem. is the file for the 3000 and 5000 series the same or did i have to use a special file for the 5000 modem ? if i have to use a special file, can someone send me this ? Thanks
Back to top	« Last Edit: Nov 29^th, 2008 at 6:42pm by Admin1 » IP Logged

Ex Member

Ex Member

Reply #1 - Nov 29^th, 2008 at 1:48pm

The files are the same for two models. �

What iDS are you upgrading from?

An 8.x upgrade requires 2 files (3 if you count the options file). �You will need:

1. cumulative_update-8.X.X.X.pkg (X's represent the version of 8 that you are upgrading to)
2. remote-8.X.X.X.pkg

You will also need your 8.X options file.

Ensure you get a hold of iSite 8.X to install it all...

Install the cumulative update (Phoenix BSP) first followed by the remote package and lastly the options file. �Do not reboot the unit until you are done with the options file. �If there is a remote chance you MAY lose power, use a UPS to ensure that you dont have an interruption in the process.

« Last Edit: Nov 29^th, 2008 at 6:43pm by Admin1 »

IP Logged

remstaler Member ★★ Offline Posts: 8	Reply #2 - Nov 29^th, 2008 at 6:15pm thx, for the help , i upgrading from 7.xxx i just was not sure if i can use the files from the 3000 series.
Back to top	IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.