www.satsig.net

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

loading package file using RedBoot

(Read 1696 times)
Ex Member
Ex Member


Feb 6th, 2009 at 8:38pm  
how can i load package file and option file using RedBoot??
what are the steps, commands?
Please help
Back to top
 
 
IP Logged
 
TDMAMike
Senior Member
★★★
Offline



Posts: 826
Reply #1 - Feb 7th, 2009 at 12:48pm  
Linux needs to be loaded first.

If you can get to a linux prompt, then the packages and opt can be dropped on root, unzipped, and installed.

Can you get to a linnux prompt?

What model iDirect? 3100?  500? 7350?

iDS version?

Reason I ask, is there are additional requirements for 3100 series remote (an upgrade prep pkg is necessary).

M
Back to top
 

Regards, &&&&M
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - Feb 7th, 2009 at 4:27pm  
Thanks for reply
my Idirect is 3100
i typed this command into hyper terminal
fis load linux
exec -c "root=/dev/mtdblock2 console=ttyS1, 9600 single"

but I got nothing after it.....

do you know how to do a Hardware reset?
I need to do a hardware reset for another Modem...I know that I have to do a short cicuit between 2 pins....but i don't know which pins?...can you help me on that one too? if you have diagrams it would be better.....Thanks man
Back to top
 
 
IP Logged
 
Pages: 1