Advertisment: Broadband via satellite
Advertisment: Planet Earth rotating animation

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
  Satellite Internet forum › iDirect Forum: hubs and terminals › Restart iHub 5IF
Pages: 1

Restart iHub 5IF

(Read 1914 times)
Ex Member
Ex Member
Jul 11th, 2009 at 4:06am  
Dear All,

I got problem on my LineCard (M1D1). I have turn off & on the card, but I am still not able to get configuration.

the message is "
failed to download configuration: ..."

I am able to ping the ip address.

I am thinking to restart the chasiss, Any idea how to do it ?

rgds,

FEldy
Back to top
 
 
IP Logged
 
TDMAMike
Senior Member
★★★
Offline



Posts: 826
Reply #1 - Jul 11th, 2009 at 4:16am  
Do not restart the chassis.  Power cycle the card via the chassis icon in iBuilder if you really want to power cycle the card (use the EDAS, that why it is there).  That, or get on console and type reboot.

Sounds like something is amiss with falcon (which identifies eth0).  I would recommend getting on console of that card and checking the software, followed by a quick check of the options file (can you telnet 0 to falcon from console?).  If no, then it sounds to me like you have a problem with your options file/falcon and may have to cat the opt into it.  Please confirm software first.
Back to top
 
Regards, &&&&M
 
IP Logged
 
Pages: 1

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy   Forum User Agreement   Forum rules   Cookie policy.