Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

Conversion Mbps to Msps

(Read 9364 times)
Ex Member
Ex Member

Oct 14th, 2009 at 12:08pm  
Dear all, how to calculate
Out bound 45 Mbps to .... Msps
In bound 2 Mbps to ...Msps

Assume ;
Modulasi In bound 8 PSK, FEC 7/8
Modulasi out bound QPSK, FEC 1/2

Tagor Muda
Back to top
IP Logged
Eric Johnston
Senior Member

Posts: 2109
Reply #1 - Oct 14th, 2009 at 12:59pm  
SR = Symbol Rate
DR = Data Rate = the information rate. This is the same as the customer information rate if there is no framing, packet header, supervisory, conditional access or encryption overhead added to the data stream in the modem.  DVB modems and IP packets add significant overheads.
CR = FEC Code Rate.  Eg. 5/16, 21/44, 1/2, 2/3, 3/4, 5/6, 7/8, 188/204, 0.95
m = modulation factor (transmission rate bits per symbol).   BPSK=1, QPSK=2, 8PSK=3, 8QAM =3, 16QAM=4 etc  

Formula:   SR = DR / (m x CR)

Best regards, Eric.
Back to top
IP Logged
Pages: 1