Advertisment: Broadband via satellite
Advertisment: Planet Earth rotating animation

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Mix & Match a vsat system, compatibilty?

(Read 2681 times)
Ex Member
Ex Member


Dec 5th, 2010 at 3:09pm  
Hi a guy here has the following hughes equipment:

1025901-2007 - 1W Tigris RFU BUC

NJR2184HH LNB

Can't find the waveguide p/n anywhere online but it says:

p/n 1012440-0002  

It's the Excalibur / Tigris picture in this document:

https://62.128.191.210/hughes_dev/files/downloads/RFU%20&%20PES%20Indentificatio
n%20Guide%20v1.2b.pdf

Is it possible to replace this BUC with a NJT5037F 2W BUC?



Back to top
« Last Edit: Dec 5th, 2010 at 5:54pm by Admin1 »  
 
IP Logged
 
USN - Retired
YaBB Moderator
★★★★★
Offline



Posts: 837
Kentucky (USA)
Reply #1 - Dec 5th, 2010 at 4:53pm  
This may help: https://static0.shopify.com/s/files/1/0008/7092/files/NJT5037_3_Ku_3W_typical_BU
C_7F_rev07M.pdf .
Note  LOF 13.05 GHz and waveguide type WR75

//greg//
Back to top
 

USN (Ret)
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - Dec 6th, 2010 at 4:27am  
Thanks Gregg, I already had this doc. What I can't seem to find is whether or not this waveguide is  WR-75 compatible if that's the right way to put it.
Back to top
 
 
IP Logged
 
USN - Retired
YaBB Moderator
★★★★★
Offline



Posts: 837
Kentucky (USA)
Reply #3 - Dec 6th, 2010 at 1:04pm  
Maybe I don't understand what you're asking then. I interpreted your question as related to simply removing the original BUC from the Tigris RFU and replacing it with a 2w NJT5037FI. I was hoping the engineering diagram on the bottom right corner of pg6 (physical dimensions of the WR75 port) contained the info you needed.

//greg//
Back to top
 

USN (Ret)
 
IP Logged
 
Pages: 1