Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

TRIPOD Stand

(Read 2069 times)
yazzdan
Member
★★
Offline



Posts: 47
Nov 30th, 2011 at 12:07pm  
I Need Tripod mount folds for compact  transport and assembles quickly with no tools or outside hardware required. Mount has to be 100% hot dipped galvanized.

Please contact me on :

Hasan.irfan@azyansat.om

www.azyansat.om
Back to top
 

Regards,&&Syed Irfan Hasan&&iDirect & VSAT Engineer
WWW  
IP Logged
 
satbaja
Member
★★
Offline



Posts: 29
Reply #1 - Dec 1st, 2011 at 1:20am  
You are describing the Baird Mount BTD-12 shown here:

https://www.bairdmounts.com/index.cfm

Search BTD-12 in the search window.
They are heavy, about 50 kg so they don't need any ballast.
They are hot dipped galvanized. No tools are required to set up the tripod mount.
They are very easy to level.
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
★★★
Offline



Posts: 2109
Reply #2 - Dec 1st, 2011 at 9:01pm  
See these two postings below, with pictures, by probecom.  She is a persistant poster of similar information in this forum and I spend a lot of time deleting her duplicate messages.  At least it would be worth you getting prices and delivery costs to your location from China. I'd like to know also. Ask if anyone has one like what you want in your area, so you can go visit and look at it.

1.2m carbon fibre
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?board=Forsale;action=display;num=130...

1m carbon fibre
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?board=Forsale;action=display;num=130...

I would also suggest 1.2m fly away from Patriot antennas.
https://www.cobham.com/media/15069/data000006_rev003.pdf
But they may have been closed down since they were bought out by Cobham. Not sure ?

Best regards, Eric.
Back to top
 
 
IP Logged
 
Pages: 1