Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

Star/Mesh Topology

(Read 2062 times)
Ex Member
Ex Member




Mar 5th, 2012 at 6:49am  
Dear All,

I wanted to know if iDirect supports Mesh Topology in between different inbounds. Is it possible for a remote in Inbound 1.1 to communicate with a remote in inbound 1.2 with direct communication between them (with no contact with the iDirect HUB station)?

Thank you in advance.

WBR,

SAT
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #1 - Mar 10th, 2012 at 12:51am  
Only certain iDS versions support mesh.  Most of the are 8.0 and earlier.  I dont believe mesh is supported in a freq hop enviro, but I recommend you check with iDirect to be certain. I have (personally) done it in a single upstream but have never testing in two...
Back to top
 
 
IP Logged
 
Pages: 1