Advertisment: Broadband via satellite
Advertisment: Planet Earth rotating animation

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

How to mute Tx ?

(Read 3551 times)
Ex Member
Ex Member

Mar 6th, 2014 at 2:01pm  
Is there a command to stop Tx and allow safe maintenance of the antenna without switching off power?
I hope DAC of standard seatel antenna or iDirect modem X5 evolution integrate this function...

Back to top
IP Logged
Senior Member

Posts: 67
SA. Australia
Reply #1 - Mar 7th, 2014 at 4:04am  
You should be able to enter at the console:

tx enable off
**this will switch off your tx carrier

When you have finished your maintenance you can enter:

tx enable on
**this will turn your carrier back on

Also just a note if you are in the console of the idirect modem you can type 'help' and it will give you a list of commands. Smiley

you could also disconnect the Tx cable from the modem. THe idirect modem is setup that it will only transmit once it has receive lock. so you could disable the receive also. i.e. rx enable off
But this could cause the antenna to try to search.
Back to top
IP Logged
Ex Member
Ex Member

Reply #2 - Mar 7th, 2014 at 3:08pm  
Thank you!
Back to top
IP Logged
Pages: 1