Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Global PLL Ku-band : Multiple local oscillator (LO) frequencies ?

(Read 3568 times)
willtek
Member
★★
Offline



Posts: 2
Jul 21st, 2014 at 10:25pm  
Hello, everyone. Somebody faced with operation of the Intellian V-1205 Global PLL Ku-band.   The PLL LNB will operate over the following standard LO Frequencies 9.75, 10.0, 10.25, 10.5, 10.6, 10.678, 10.7, 10.75, 10.8, 11.0, 11.05, 11.2, 11.25 and 11.3 GHz, as well as any special dedicated frequencies, ensuring future proof operation, and allowing the operator to fine-tune LOs to maximize performance for their specific environment.
How does it work?
Back to top
« Last Edit: Feb 1st, 2017 at 6:00pm by Admin1 »  
 
IP Logged
 
badlnbf
Member
★★
Offline



Posts: 10
US
Reply #1 - May 4th, 2016 at 12:04am  
Hello there Willtek,

This is process to set LO frequency
Using the Intellian DISEqC communication ACU, select the LNB type.(i.e. type O, type R etc.). The ACU sends a message to the NBD/FSK board to set the LNB type. In “Another” mode, the ACU sends a message to the NBD/FSK board including LO set by a customer. The LNB is set the type according to the type table in the MPU which is PLL circuit in the LNB. The customer can use like SMW LNB with common DISEqC. (i.e. 13V, 18V, 13V+22KHz, 18V+22KHz). Hope this helps?

Chris
Intellian Technologies
Back to top
 
YIM  
IP Logged
 
Pages: 1