Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
  Satellite Internet forum › iDirect Forum: hubs and terminals › iperf UDP test - Evolution X3
Pages: 1

iperf UDP test - Evolution X3

(Read 4938 times)
mrninni
Member
★★
Offline



Posts: 41
Aug 22nd, 2014 at 5:40pm  
Hi all,
I performed several Downstream UDP test by iperf, in order to evaluate the max bandwidth for an evolution X3 satmodem.
The max value registred is about 25 Mbps.

The iDirect Spec. Sheet reports:

Max. Info Rate: 150 Mbps
Max. Remote IP Data Rate: 29 Mbps
https://www.idirect.net/~/media/Files/Spec%20Sheets/January%202013/Spec-Sheet-Ev...

What does it means? What is the real limit?
Many thanks in advance.

Regards
Back to top
 
 
IP Logged
 
fluffymassive
Senior Member
★★★
Offline



Posts: 67
SA. Australia
Reply #1 - Aug 26th, 2014 at 6:33am  
Hi,

Are you running this on a network which has an information rate of 150Mbps? Or just simply bench testing with a PC plugged into the modem?

Where are you running the iperf sessions from? NMS and the Remote?

Also if running over a network you will need to make sure that you are running using the maximum MODCOD for the network.

I would be interested to see the results of the testing as I have never gone up to that rate before.

Also some other things to check:
-CPU usage
-TCP/UDP sessions
-bottlenecks in the testing equipment
Back to top
 
 
IP Logged
 
scagno83
Member
★★
Offline



Posts: 4
Reply #2 - Aug 29th, 2014 at 6:52am  
Hi Fluffymassive,

I am a mrninni co-worker.
I confirm that the network has a information rate of 33823 Kbps.
We are running the iperf server session on the PC plugged into the modem . This modem is using the maximum MODCOD for the net.
Back to top
 
 
IP Logged
 
mrninni
Member
★★
Offline



Posts: 41
Reply #3 - Sep 1st, 2014 at 4:46pm  
Hi,

Here I am with the answers to your questions:

The FWD carrier allows a rate higher than 25 Mbps (about 34 Mbps) so no limitations are present. The satmodem was able to use the nominal MODCOD (or better).

The iperf session (UDP) has been launched from a PC directly connected to the satmodem, to an our internal server.

I'd like to understand better the iDirect Spec. Sheet details:

Max. Info Rate: 150 Mbps
Max. Remote IP Data Rate: 29 Mbps
https://www.idirect.net/~/media/Files/Spec%20Sheets/January%202013/Spec-Sheet-Ev...

What value should I consider?
Many thanks
Back to top
 
 
IP Logged
 
Pages: 1

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy   Forum User Agreement   Forum rules   Cookie policy.