Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
[b]Welcome to this satellite broadband discussion forum.[/b] Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the [b]bottom of the forum home page[/b] if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products [b]free of charge[/b]; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

Reliable and Cost Effective 4.5 Meter Earth Station Antenna

(Read 505 times)
Senior Member

Posts: 58
May 10th, 2019 at 9:16am  
Looking for 4.5m Satellite antenna?
Which band do you want? C, KU, DBS, KA, L, S, X?  Yes, we have them all!

The probecom 4.5-meter antenna delivers exceptional performance for transmit/receive and receive only applications for L through Ka-band frequencies. This antenna offers a reflector design that incorporates precision-formed panels, truss radials and hub assembly using matched tooling for interchangeable components. It features an innovative Cassegrain or Ring Focus feed and sub-reflector design which results in high gain, low noise temperature, high antenna efficiency and excellent rejection of noise and microwave interference. A large center hub provides spacious accommodation for equipment mounting. The reflector is supported by a galvanized elevation over azimuth kingpost pedestal that provides the required stiffness for pointing and tracking accuracy. The pedestals are designed for full orbital arc coverage and are readily adaptable to ground or rooftop installations.

Highlighted Features
*Meets CCIR 580 and INTELSAT Requirements
*Precisely adjusted before leaving factory, and no need theodolite to adjust the panel accuracy;
*High precision alloy aluminum main reflector.
*Hot spray galvanized with white paint
*CP/LP switchable feed
*High RF performance          
*Galvanized stainless steel hardware            
*Different frequency ranges from many feed configurations
*Ka band antenna with rotary pedestal is available
*A large hub for install RF equipments
*Multi-layer anti-corrosion treatment.

*L,S, X ,Ka bands and multi-bands
*Customer feed system design
*800MHz Extended C band is available
*Full motion antenna
*Feed blower or deicing sub-systerm with automatic controls
*Two or four Tx/Rx port in linear or circular polarized feeds 
*Antenna control system with tracking
*ODU Support Kits
*Increase the surface spray zinc thickness along seaside
Should you have any requirement please feel free to contact: sales@probecom.cn or follow us at our SNS links:
1、 LinkedIn: https://www.linkedin.com/in/probecom1/
2、 Face book: https://www.facebook.com/probecom.dish.antenna/
3、 Twitter: https://twitter.com/probecom_tweet
4、 E-mail address: sales@probecom.cn
5、 Website: website url deleted or www.probecom.com

3.0m VSAT Antenna/3.7m VSAT Antenna/ 4.5m VSAT Antenna/6.2m Earth station antenna
7.3m Earth station antenna/9.0m Earth station antenna/11.3m Earth station antennas
1.0m Flyaway antenna/1.2m Flyaway antenna/4.5m TVRO antenna/6.2m RXO antenna
Back to top
IP Logged
Pages: 1