Satsig logo
Satellite Broadband Forum.
Welcome, Guest. Please Login
Welcome to this satellite broadband discussion forum.  Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure.  Both service providers and customers are encouraged to contribute. Read the Forum rules.  Click Register at the bottom if you want to join.
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
How to adjust LNB frequency to 10 GHz (Read 7951 times)
alaklubimsaa
Member
**
Offline



Posts: 10
Gender: male
How to adjust LNB frequency to 10 GHz
Mar 8th, 2007 at 4:41am
 
I pointed the dish to express 4A ,I entered all required Data  correctly but error value still over range.

The LNB Model is NJR2784HH ,I used it for 2 way.

when i want to point my dish to any satellite , I use tv reciver and change LNB from UNV to  10 GHZ  then enter channel freq and SR then get  signal.
Now I want to adjust the LNB freq to 10 GHZ by linkstar modem commands .

please help me.
Back to top
« Last Edit: Jun 27th, 2007 at 8:40am by Admin1 »  

msaa121@gmail.com
 
IP Logged
 
epsilon
Ex Member


Re: How to adjust LNB frequency to 10 GHz
Reply #1 - Jun 26th, 2007 at 12:47pm
 
The -f parameter in the save bootparam command specifies your LNB freq. oscillator. You just have to enter there the teleport frequency-LO (in Hz).
Back to top
« Last Edit: Jun 27th, 2007 at 8:41am by Admin1 »  
 
IP Logged
 
Eric Johnston
Senior Member
***
Offline


Personal text from Profile,
Options, Top line

Posts: 2125
Re: How to adjust LNB frequency to 10 GHz
Reply #2 - Jun 26th, 2007 at 7:23pm
 
The NJR2784H LNB has a fixed 10 GHz LO frequency.

A universal satellite TV LNB has 9.75/10.6 GHz LO frequency, switchable using a 22kHz tone.

If you have lined up the dish using a universal satellite TV LNB set to 9.75 GHz and a satellite TV receiver, then if you change to a NJR2784H 10 GHz LNB and linkstar modem the L band frequencies will all be 250 MHz lower.

Subtract the LNB LO frequency from the satellite downlink frequency to get the receive L band cable frequency.

The latest DVB-S2 linkstar modem spec says it is "universal LNB compatible" so I guess it has commandable LNB voltage or 22 kHz tone to switch the LNB frequency.   Invacom do high quality universal VSAT LNBs with various switchable LO frequencies and either voltage or 22 kHz tone to control the frequency choice.  I don't know the linkstar commands to use.

I am not aware that the older linkstars had this facility, instead you had to pre-buy the correct LNB, with either 9.75, 10, 10.6, 11.3 GHz LO frequency, according to where you wanted to use it.

I am pleased with the trend towards VSAT modems becoming compatible with universal LNBs.  It will encourage the use this this new TRIA which comprises a switchable universal PLL LNB and a 3 watt Ku band BUC all in one neat small module.
wxw
Best regards, Eric.
Back to top
« Last Edit: Sep 28th, 2007 at 11:38am by Admin1 »  
WWW  
IP Logged
 
Page Index Toggle Pages: 1
 
Anytime you want to order from Amazon...
If in Americas, please use the link below:

Useful links:
My latitude longitude (lat/long) finder
Email me: eric@satsig.net
Anytime you want to order from Amazon...
If in Europe, please use the link below: