Satellite Internet

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Both service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask question. May 2018: GDPR: Updates to Privacy and Cookies policies: As you may know, a new EU data protection law called GDPR will apply from Friday 25th May 2018. As part of satsig's commitment to protecting the privacy of site visitors and forum members, I have therefore updated the Privacy and Cookie policies. There are now links leading to these policies: Disclaimer, Terms of Use and Privacy, Forum User Agreement, Forum Rules and Cookies at the bottom of the home page and all forum pages. Read the Forum rules.
      Satellite internet forum          
Pages: 1

LinkStar VSAT modem

(Read 4271 times)
Ex Member
Ex Member


Aug 25th, 2008 at 9:18am  
LinkStar VSAT modem

LinkStar™ is the star-based VSAT system for service providers, ISPs, and corporate network managers who are seeking a system based on DVB standards. LinkStar's edge is in its dynamic bandwidth allocation that makes it more efficient and faster than other TDMA systems. Terminals can transmit data to the network hub at speeds up to 1.15 Mbps, with data downloads of up to 60 Mbps, satisfying bandwidth-intensive applications using IP data.
Back to top
« Last Edit: Feb 20th, 2015 at 4:44pm by Admin1 »  
 
IP Logged
 
Ex Member
Ex Member


Reply #1 - Sep 14th, 2008 at 12:27pm  
Could u pls give me guide line on how to configure Linkstar Modem
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
***
Offline


Personal text from Profile,
Options, Top line

Posts: 2108
Reply #2 - Sep 14th, 2008 at 12:53pm  
Old Linkstar installation manual. 709k pdf

Glossy quick Linkstar installation guide 1.95 Mbytes pdf.  This should be in the box with your RCST modem. Note that the initial IP address is formed using the last 3 hex pairs from the MAC address, for the latest modems. e.g. 10.0.x.x 10.1.x.x. 10.2.x.x  10.3.x.x 10.4.x.x etc.

Before you start you need to know from your service provider:

The name and orbit location of the satellite, downlink frequency and the nominal polarisation name.

The configuration string (one long line of text that must be copied and typed in exactly, character by character) with no mistakes.

NEVER get the coax cables crossed over or shorted and always power off at the mains before connecting or disconnecting the coax cables.
 
Best reagrds, Eric.

Back to top
« Last Edit: Jan 21st, 2010 at 8:32am by Admin1 »  
 
IP Logged
 
Pages: 1