Logo

Satellite Internet Forum.
Please note that this forum is now READ ONLY and closed for login and changes
The new forum is here Space and Satellite Communications forum

Welcome, Guest.
Welcome to this satellite broadband discussion forum.  Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure.  Both service providers and customers are encouraged to contribute.  Read the Forum rules.
      Satellite internet forum          

Traffic load balancing using multiple modems

(Read 1787 times)
saiahmed
Ex Member


Nov 8th, 2012 at 5:15pm  

Hi,

I have a high datarate/TCP session requirements in one of my site and we would like to install 4 iDirect modems connected to a ME3400 switch at the remote end.

What would be the best way to perform the load balancing so that the total traffic / TCP sessions are equally balanced over these 4 iDirect WAN circuits?

At the remote end, we have /24 subnet which will be used by the customer. Is it possible to have that same /24 subnet added as a static route to all of these 4 modems? If yes, then how the iDirect hub will perform the path selection and load balancing?

Please share your thoughts...

Thanks,
Saiahmed
Back to top
 
 
IP Logged
 
Anton
Ex Member


Reply #1 - Mar 18th, 2013 at 9:04pm  
you can use cisco routers to perform policy-based routing or any L3 load balancers.
Back to top
 
 
IP Logged