Netmodem II Plus Problem or ISp

(Read 3131 times)

alexashinze Member ★★ Offline Posts: 16 Imo state, Nigeria	Oct 22^nd, 2007 at 10:48am Hello Good day. My modem takes too much time to lock TX then NET. sometimes as much as 2hrs. on re alignment I got signal strength of 16.8v. My snr is 11.6. What cld be my problem pls.
Back to top	IP Logged

Oasis Networks Senior Member ★★★ Offline Posts: 232	Reply #1 - Oct 22^nd, 2007 at 12:06pm what version do you have?
Back to top	www.oasisnetworks.net - Oasis Networks - Online with you! WWW \| Skype/VoIP \| Facebook IP Logged

Ex Member

Ex Member

Reply #2 - Oct 22^nd, 2007 at 12:08pm

Sounds like you are properly pointed.

My guess is that your initial power is set either too HIGH, or too LOW in your options file and your busrts are arriving at the hub either above, or below the UCP parameters (Uplink Control parameters) defined in the config at the Hub.

You need to talk with the provider and determine the best setting. I am almost certain that this is the case. Most HNOs have their UCP set to 9 or 10 db C/N (Sweet spot). If you arrive too high or too low from that value you arent getting in.

NMII+s are legacy modems. You might want to consider upgrading if it is in your budget.

IP Logged

alexashinze Member ★★ Offline Posts: 16 Imo state, Nigeria	Reply #3 - Oct 26^th, 2007 at 1:27pm Thanks man. I am most grateful. Let me get across to my ISP. Thanks
Back to top	IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.