Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
  Satellite Internet forum › iDirect Forum: hubs and terminals › Download Package via HyperTerminal and winscp
Pages: 1

Download Package via HyperTerminal and winscp

(Read 7339 times)
smlt_vsat
Senior Member
★★★
Offline



Posts: 56
Jul 7th, 2008 at 7:41am  

Hi all

How i can download Package via Hyperterminal and winscp to infinty modems

Pls in details
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #1 - Jul 7th, 2008 at 11:55am  
What version iDS?

The process will take some time to type..and I wont be able to get to it this morning.  Possibly this evening.  

You should consider getting ahold of iDirects PDF "Recovering Infiniti Remotes."  It would save a lot of typing.
Back to top
 
 
IP Logged
 
smlt_vsat
Senior Member
★★★
Offline



Posts: 56
Reply #2 - Jul 7th, 2008 at 1:22pm  
ids version is 7.0.2 ..i hve the docs but i m confused in sme areas.
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #3 - Jul 7th, 2008 at 10:44pm  
That document explains the process pretty good.  What is it that you dont understand?
Back to top
 
 
IP Logged
 
smlt_vsat
Senior Member
★★★
Offline



Posts: 56
Reply #4 - Jul 8th, 2008 at 8:15am  
Mr.Mike

i have ibuilder and imonitor manuals with me . Could you provide some documents related to hub management,troubleshooting,(inculding commands), i mean to troubleshoot /Monitor PP and NMS servers vis console (Linux Based)

Thanks in advance.

Smltl
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #5 - Jul 8th, 2008 at 11:53am  
Such manuals (bona-fide troubleshooting manuals) do not exist.  What does exist are operator manuals, tech bulletins, and bug notices.   It sounds like you have those.
Back to top
 
 
IP Logged
 
- Siva -
Member
★★
Offline



Posts: 21
Reply #6 - Jul 10th, 2008 at 3:01am  
1. Connect Remote with your PC by Cisco console cable and turn on the Remote.
2. Use Hyper Terminal or other applications and login to Remote.
3. Use “ifconfig” command, which will give you the IP Address of the remote.
4. Configure your PC LAN IP with same subnet as Remote and connect a “Straight cable”.
5. Make sure, you can ping from PC to Remote.
6. Use iSite to download package and option file into Remote (hope you know how to use iSite).
7. If you still want to use WinSCP to download image, you must use “Recovery Procedure” and follow the steps given in that.
Hope this helps..!
Back to top
 
Caution..! Always read and understand my procedures, before apply.
 
IP Logged
 
wesambhaya
Member
★★
Offline



Posts: 18
Reply #7 - Jul 26th, 2008 at 12:28pm  
Hello
See the following excellent documents:

1- https://www.link-sat.org/Recovery%20iDirect%20Modems/Console%20Port%20Adapter%20...

2- https://www.link-sat.org/Recovery%20iDirect%20Modems/How%20Do%20I%20Recover%20a%...

3- https://www.link-sat.org/Recovery%20iDirect%20Modems/Recovering%20Infiniti%20Mod...

4- https://www.link-sat.org/Recovery%20iDirect%20Modems/RedBoot%20Recovery.doc
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #8 - Jul 26th, 2008 at 1:56pm  
The above are recovery procedures and have nothing to do with the rlock function.
Back to top
 
 
IP Logged
 
Pages: 1

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy   Forum User Agreement   Forum rules   Cookie policy.