www.satsig.net

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
Pages: 1

iDirect 3100 TX Light

(Read 1448 times)
Ex Member
Ex Member


Nov 5th, 2008 at 7:30am  
What does it mean when the TX light located on the front of the modem does not come on when setting up a system.
Back to top
 
 
IP Logged
 
TDMAMike
Senior Member
★★★
Offline



Posts: 826
Reply #1 - Nov 5th, 2008 at 11:53am  
No Tx Light:

1. System may not be "activated" in the NMS at the hub
2. System does not know where it is geographically located (read: isnt getting GPS NMEA to calculate its fame start).
3. Downstream SNR (C/N) may be extremely low (under 5.5) and is not enough to unmute the TX on the iDirect
Back to top
 

Regards, &&&&M
 
IP Logged
 
Pages: 1