Tooway Ku Band modem not locking

(Read 5404 times)

A.Walker Senior Member ★★★ Offline Posts: 316	Apr 1^st, 2009 at 12:27pm Some KU Band Tooway modems were found not to lock , this situation has been resolved and the NOC has made a small software change to effect a cure . You may find the modem will take around 20 minutes to lock but the issue is resolved , please note this has not affected all Ku Band modems only a small batch was affected.
Back to top	WWW IP Logged

Inland_Computers

Member
★★
Offline

Posts: 9

Reply #1 - Apr 2^nd, 2009 at 3:40pm

It was affecting KA band systems as well, but if you left the modem on for 24 hours the lock would eventually occur.

In our latest batch of modem, we have seen an improvement and initial lock times are now taking 1 hour 15 mins. Better, but obviously not perfect when preparing/testing numerous modems for customer installs.

Once an initial lock is established, subsequent locks generally take about 60 seconds and there's no sign of any further problems or lock delays.

Incidentally, some installers (DIY-ers especially), may get caught out during the activation process, as stage 2 of 4 displays "the modem will reboot" - but it doesn't. It then shows "Stage 3 of 4" whereby you close your web browser, but the Tooway modem will still require a physical power cycle reboot in order to initiate latest software updates and self-reboots.

After this, everything is perfect and you'll have a good connection.

IP Logged

Eric Johnston

YaBB Moderator
★★★★★
Offline

Posts: 2109

Reply #2 - Apr 2^nd, 2009 at 4:48pm

Why does it take so long ?

Is it the downstream that is taking ages to lock or the upstream ?

If the downstream, what downstream frequency are you using and does this differ greatly from the locked frequency ?

If the upstream, what upstream search parameters are showing ? �Maybe different ones would be a better match to the hub ? Are Eutelsat/Skylogic helping ?

Best regards, Eric.

IP Logged

Eric Johnston YaBB Moderator ★★★★★ Offline Posts: 2109	Reply #3 - Apr 2^nd, 2009 at 7:09pm I can appreciate it not taking too long once the modem has worked once since it has learned the frequencies and power levels. What about new modems ? What Downstream frequency = ? What Upstream search parameters: Freq Offset = ? Freq search steps = ? Max power = ? Min power = ? Number of power steps = ? Best regards, Eric.
Back to top	IP Logged

A.Walker Senior Member ★★★ Offline Posts: 316	Reply #4 - Apr 2^nd, 2009 at 9:06pm We are referring to Ku not Ka Frits
Back to top	WWW IP Logged

europe-satellite.com Senior Member ★★★ Offline Posts: 541 London UK	Reply #5 - Apr 3^rd, 2009 at 8:25am Quote: We are referring to Ku not Ka Frits Hi Anthony, Things get mixed up a bit, I was replying on a KA post, see above (KA post).
Back to top	« Last Edit: Apr 3^rd, 2009 at 3:09pm by europe-satellite.com » IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.