Advertisment: Broadband via satellite
Advertisment: Planet Earth rotating animation

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

how the reset command work?

(Read 2194 times)
Ex Member
Ex Member


May 23rd, 2009 at 8:57pm  
hello guys

how to reset the idirect 3100 from telnet the command says:

usage:
reset [board|application]

what i must replace [board|application]


thank in advance
Back to top
 
 
IP Logged
 
TDMAMike
Senior Member
★★★
Offline



Posts: 826
Reply #1 - May 23rd, 2009 at 10:49pm  
reset board - resets everything, redboot and falcon.  Boot time, approx 3 - 1/2 minutes.

reset application - will only reset the falcon process (if you are an iNFINITI customer). Falcon is the process tied to your options file. The unit will not go through a full redboot when reseting falcon.  Boot time is approx 40-45 seconds.
Back to top
 

Regards, &&&&M
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - May 24th, 2009 at 12:36am  
TDMAMike wrote on May 23rd, 2009 at 10:49pm:
reset board - resets everything, redboot and falcon.  Boot time, approx 3 - 1/2 minutes.

reset application - will only reset the falcon process (if you are an iNFINITI customer). Falcon is the process tied to your options file. The unit will not go through a full redboot when reseting falcon.  Boot time is approx 40-45 seconds.


thank you
Back to top
 
 
IP Logged
 
Pages: 1