how the reset command work?

(Read 2403 times)

Ex Member Ex Member	May 23^rd, 2009 at 8:57pm hello guys how to reset the idirect 3100 from telnet the command says: usage: reset [board\|application] what i must replace [board\|application] thank in advance
Back to top	IP Logged

Ex Member Ex Member	Reply #1 - May 23^rd, 2009 at 10:49pm reset board - resets everything, redboot and falcon. �Boot time, approx 3 - 1/2 minutes. reset application - will only reset the falcon process (if you are an iNFINITI customer). Falcon is the process tied to your options file. The unit will not go through a full redboot when reseting falcon. �Boot time is approx 40-45 seconds.
Back to top	IP Logged

Ex Member

Ex Member

Reply #2 - May 24^th, 2009 at 12:36am

Quote:

reset board - resets everything, redboot and falcon. �Boot time, approx 3 - 1/2 minutes.

reset application - will only reset the falcon process (if you are an iNFINITI customer). Falcon is the process tied to your options file. The unit will not go through a full redboot when reseting falcon. �Boot time is approx 40-45 seconds.

thank you

IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.