Advertisment: Broadband via satellite
Advertisment: Planet Earth rotating animation

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

idirect lan port not coming up

(Read 3610 times)
Ex Member
Ex Member


Aug 5th, 2009 at 6:29am  
please help me my moden lan port is not coming up but when i enter through console i get this report

i need your help

DRAM Test       ................                                
DRAM Test Successful                    
+No network interfaces found                            



tarting falcon_monitor: OK

ixp425_eth: Error reading MII reg 0 on phy 0
ixp425_eth: Error reading MII reg 0 on phy 1
ixp425_eth: Error reading MII reg 0 on phy 2
ixp425_eth: Error reading MII reg 0 on phy 3
ixp425_eth: Error reading MII reg 0 on phy 4
ixp425_eth: Error reading MII reg 0 on phy 5
ixp425_eth: Error reading MII reg 0 on phy 6
ixp425_eth: Error reading MII reg 0 on phy 7

iDirect Linux 2.4.24-uc0-iDirect0
Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: ixp425_eth: Error reading MII reg 0 on phy 0
ixp425_eth: Error reading MII reg 0 on phy 1
ixp425_eth: Error reading MII reg 0 on phy 2
ixp425_eth: Error reading MII reg 0 on phy 3
ixp425_eth: Error reading MII reg 0 on phy 4
ixp425_eth: Error reading MII reg 0 on phy 5
ixp425_eth: Error reading MII reg 0 on phy 6
ixp425_eth: Error reading MII reg 0 on phy 7
Direct Linux 2.4.24-uc0-iDirect0
Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: ixp425_eth: Error reading MII reg 0 on phy 0
ixp425_eth: Error reading MII reg 0 on phy 1
ixp425_eth: Error reading MII reg 0 on phy 2
ixp425_eth: Error reading MII reg 0 on phy 3
ixp425_eth: Error reading MII reg 0 on phy 4
ixp425_eth: Error reading MII reg 0 on phy 5
ixp425_eth: Error reading MII reg 0 on phy 6
ixp425_eth: Error reading MII reg 0 on phy 7



ese
Back to top
« Last Edit: Aug 5th, 2009 at 8:52am by Admin1 »  
 
IP Logged
 
TDMAMike
Senior Member
★★★
Offline



Posts: 826
Reply #1 - Aug 5th, 2009 at 12:17pm  
Is this a 3100 iDirect unit? If not, what model is it?  Also, what iDS version are you using?

1.  Can you telnet 0 from console?  (doubtful)
2.  Look at your options fiel in notepad and confirm whether or not it matches the software version on your iDirect unit.


There is obviously something wrong with eth0 of that unit.  It could be your options file or the port could be dead entirely.
Back to top
 

Regards, &&&&M
 
IP Logged
 
n1ghtwalk3r
Member
★★
Offline



Posts: 22
Reply #2 - Aug 17th, 2009 at 9:50pm  
brother open up your idrect 3100 modem fallow up the lines to a ic called halo 3 check prbly if its not blown up if it is then thts why ur lan port don t work gud day
Back to top
 
 
IP Logged
 
Pages: 1