Advertisment:

Broadband via satellite

Advertisment:

Worldwide satellite services from Ground Control Company

Satellite Internet Forum.

Welcome, Guest. Forum rules.

Home Login Register

Satellite Internet forum › iDirect Forum: hubs and terminals › TX Levels

Pages: 1

Send Topic | Print

TX Levels

(Read 2491 times)

bukkieboy Member ★★ Offline Posts: 1	Nov 13^th, 2009 at 5:09pm I am having problems with the TX levels on my Evolution X3 with Bentley walker the RX levels are fine but I am told that the Tx levels are low I have not had this problems before could some one help me out My email is bukkieboy@gmail.com
Back to top	IP Logged

Ex Member Ex Member	Reply #1 - Nov 13^th, 2009 at 8:34pm I would recommend working this directly with their NOC. It is hard to say how close you are to your one dB compression point, so it is best to work it thru them. You may have some additional power margin available, so call them.
Back to top	IP Logged

tunde300us Senior Member ★★★ Offline Posts: 62	Reply #2 - Nov 15^th, 2009 at 12:50pm U mean to say your TX level is too high i guess.Like mike said i think its something you have to work out with bentley walker. What is the size of ur antenna and was a 1db test done ? if it was done before i think maybe you should do it again
Back to top	IP Logged

Pages: 1

Send Topic | Print

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.