idirect strange problem

(Read 4250 times)

Ex Member

Ex Member

Jan 21^st, 2010 at 3:17pm

Hi all
i have idirect modem 3000 series
the problem is
i can not access via isite but i can ping the modem (i know the modem ip)
also i can not telnet the modem but i can ping as i told you
i can logo on via hyper using root and iDirect as password
i try to load new option file via recovery procuder but it restart in last step and dosnot take new option file
also it do sont respond to command Telnet 0
so my problem in point is
1- i can ping but i can not telnet
2- i can log on via hyper but i can not log via isite
3-no respond for telnet 0
4- rx off
so help me to sort out this problem and tell me how i can download the image via hayper

IP Logged

Ex Member Ex Member	Reply #1 - Jan 22^nd, 2010 at 1:46am There is a problem with your options file. Inability to telnet 0 is a dead giveaway. You need to stop the falcon process before attempting to cat in the new options file From the root/linux prompt type: service idirect_falcon stop Ensure the options file you are loading is "good" and it is not a hub-side options file.
Back to top	IP Logged

Ex Member Ex Member	Reply #2 - Jan 22^nd, 2010 at 3:26pm Thank you sir may you tell me how to do that i mean after i stop falcon 1- what is the steps i have to do to load good option file 2- how i know the pkge (image) virsion via hyper
Back to top	IP Logged

Ex Member

Ex Member

Reply #3 - Jan 22^nd, 2010 at 3:52pm

Dear mike
i did these steps
1-service idirect_falcon stop
2- recovery steps
A- cd /etc/idirect/falcon
B- mv falcon.opt falcon.opt.old
C- cat > falcon.opt
D- paste the option file
E- service idirect_falcon restart
the problem is the modem not respond for restart
i did also with out stop falcon it was the same
no auto restart after the last step
3- what i have to do
4- how i know the image virsion via hayper

IP Logged

Ex Member

Ex Member

Reply #4 - Jan 23^rd, 2010 at 1:28am

This has been posted at least 10 times that I know of. Not sure where it goes. The procedures can be found in the the "How to recover iNFINIT remotes" document.

Open the good opt in notepad. �
Control A and right click/copy all
From the linux prompt (root) type:
# service idirect_falcon stop
# cd .. (ensure that space is there)
# cd /etc/idirect/falcon/
# ls -l (note that falcon.opt resides in the directory)
# cat > falcon.opt (when it moves you down to the next line automatically, right click and paste the "good" options file).

Once it pastes (fully). Hit the <enter> key once and Control D (done). �

Type reboot at the linux prompt. �When it comes up, it will be on the good opt.

IP Logged

fluffymassive Senior Member ★★★ Offline Posts: 67 SA. Australia	Reply #5 - Feb 16^th, 2010 at 6:45am I would suggest removing/renaming the old options file first before cat'ing.
Back to top	IP Logged

Ex Member Ex Member	Reply #6 - Feb 16^th, 2010 at 11:19am That is certainly good practice (and the textbook answer), but more often than not the opt is corrupt...and therefore unusable.
Back to top	IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.