Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask a question. VSAT service providers and satellite equipment sellers may feature their products free of charge; just register and get posting. Paid-for adverts, top left and top right, on all forum pages, are also available. Read the Forum rules.
      Home            Login            Register          
  Satellite Internet forum › iDirect Forum: hubs and terminals › About option file value of MODEM_PARAMETERS
Poll Poll
Question: Someone how to view parameters!!

Idirec 3000    
  0 (0.0%)
OPTIONS_PARAMETERS    
  1 (100.0%)




Total votes: 1
« Created by: Robert on: Jul 7th, 2014 at 4:19pm »

Pages: 1

About option file value of MODEM_PARAMETERS

(Read 2823 times)
Ex Member
Ex Member
Jul 7th, 2014 at 4:19pm  
Good Morning to all.
Refer to value MODEM_PARAMETER of Modem 3000 Series.
I would like to know how I have to do to check the values ​​that correspond to each type of modulation? For example rx_modtype 1 = QPSK, 8PSK etc. rx_modtype 2 =.
What would be the command or arguments to see that each value has meaning?
From already thank you very much
Back to top
« Last Edit: Jul 22nd, 2014 at 10:41am by Admin1 »  
 
IP Logged
 
Ex Member
Ex Member
Reply #1 - Jul 17th, 2014 at 5:59am  
0      QPSK Rate 1/4
1      QPSK Rate 1/3
2      QPSK Rate 2/5
3      QPSK Rate 1/2
4      QPSK Rate 3/5
5      QPSK Rate 2/3
6      QPSK Rate 3/4
7      QPSK Rate 4/5
8      QPSK Rate 5/6
9      QPSK Rate 8/9
10      QPSK Rate 9/10
11      8PSK Rate 3/5
12      8PSK Rate 2/3
13      8PSK Rate 3/4
14      8PSK Rate 5/6
15      8PSK Rate 8/9
16      8PSK Rate 9/10
17      16APSK Rate 2/3
18      16APSK Rate 3/4
19      16APSK Rate 4/5
20      16APSK Rate 5/6
21      16APSK Rate 8/9
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
★★★
Offline



Posts: 2109
Reply #2 - Jul 21st, 2014 at 9:43am  
I am trying to help someone.
I have similar questions for new iSCPC system:

1.
Extract from options file:
tx_mode = 2
tx_modtype = 1
tx_clksource = 0
tx_fecrate = 15
tx_scram = 1
tx_diff = 0
tx_specinv = 0
tx_power_in_dbm = -35.000000
tx_spreading_factor = 1
tx_spread_enable = 0

What is the above modulation type and FEC ratio ?


============
2   Another question
Extract from options file:
tx_mode = 2
tx_modtype = 0
tx_clksource = 0
tx_fecrate = 18
tx_scram = 1
tx_diff = 0
tx_specinv = 0
tx_power_in_dbm = -2.000000
tx_spreading_factor = 4
tx_spread_enable = 1

What is the above modulation type and FEC ratio ?



=================
Best regards, Eric
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
★★★
Offline



Posts: 2109
Reply #3 - Jul 21st, 2014 at 11:19am  
I think I have solved it. I got them to look at the iSite screen.

tx_modtype = 0    BPSK
tx_modtype = 1    QPSK

tx_fecrate = 15    FEC=0.793
tx_fecrate = 18    FEC=0.495

Is that right ?
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #4 - Jul 22nd, 2014 at 5:30am  
Hi Eric,

Looking at iSite like you have I presume when you select the drop down box for the MODCOD it will be either 0,1,2 and then the FEC drop down is then dependant on the MODCOD selected. if you used a process of elimination by selecting each type you could create a MODCOD/FEC grid

I.e.
MODCOD    0      1      2
FEC            12    17    22
                  13    18   23
Back to top
 
 
IP Logged
 
Pages: 1

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy   Forum User Agreement   Forum rules   Cookie policy.