Advertisment: Broadband via satellite
Advertisment: Planet Earth rotating animation

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Hughes Net / DW6000 parts needed

(Read 4066 times)
Ex Member
Ex Member


Apr 14th, 2007 at 10:20am  
I'm in need of a list of EU stores or businesses, that might possibly carry LNBs compatable with Direcway/HughesNet Systems. I have 2 HughesNet dishes here (purchased in USA) and discovered that the LNBs are not the correct frequency range. The BUCs I believe are compatable....A radio wave, is a radio wave, is a radio wave....I hope. But I'm searching for 2 LNB's.

Please help, I would hate to think of these two .98m systems as overly large paper weights.

richrichardson@yahoo.com
Back to top
« Last Edit: Apr 24th, 2008 at 1:12pm by Admin1 »  
 
IP Logged
 
Ex Member
Ex Member


Reply #1 - Sep 17th, 2007 at 9:15pm  
Hi there

You should contact a Hughes VAR as they will need to get you connected to the European service and I think this carries a charge to cover the management of this
Back to top
 
 
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1138
Reply #2 - Apr 24th, 2008 at 1:17pm  
If you want to use these HughesNet terminals in Europe approach some of the european HughesNet VSAT service providers and ask about the downlink frequencies and thus appropriate LNB type (and thus local oscillator frequency) to use.

You will need to verify if the OMT/filter assembly also is compatible with the europe downlink freqencies.

Best regards, Eric.
Back to top
 
WWW  
IP Logged
 
Pages: 1